TIMAR A88MH 2.5 inch SATA III(6Gb/s)SSD
Utilizes an industrial-grade controller paired with original high-quality MLC NAND Flash, ensuring product stability and durability. Features shock and vibration resistance, employs anti-sulfuration technology, and supports -40°C to 85°C, meeting the operational requirements in harsh industrial environments. Supports pSLC technology to further enhance product endurance. Incorporates PLP technology to ensure data integrity and system stability.
Features
1. Industrial-grade controller and electronic components, MLC NAND Flash resources, offering high reliability, excellent stability, and long lifespan.
2. Supports -40°C to 85°C, meeting the operational requirements in harsh industrial environments.
3. Supports pSLC technology, significantly enhancing the performance, reliability, and lifespan of MLC particles, achieving product performance comparable to SLC particles.
4. Multi-point temperature control technology, with external temperature sensors, prevents the SSD from overheating, ensuring safe and stable long-term operation.
5. LDPC ECC error correction technology, with correction capability 3-5 times that of traditional BCH error correction, safeguards data security.
Technology Application
Anti-Sulfurated
Targeted anti-sulfuration treatment is applied to components on the module that may undergo sulfuration and affect functionality, to ensure proper operation of the module.
Wide Temperature
A range of product options with different operating temperature ranges are available, allowing the storage devices to operate stably within temperatures of -25℃ to 85℃ / -40℃ to 85℃.
Power Shield
Power protection is a preset feature across the full standard series of SSD products. When the external voltage environment fluctuates, the voltage detection circuit (VDT) inside the controller automatically activates the power protection function. This causes the SSD controller to halt acceptance of new write commands, thereby preventing damage to the internal firmware and data stored in the flash memory.
Thermal Throttling
Industrial SSDs are equipped with built-in high-precision temperature sensors, combined with firmware settings, to achieve phased throttling. The independent firmware within the control chip enables the controller to monitor the SSD's temperature data in real time, perform dynamic temperature adjustments based on data reliability, and transmit the data back in real time.
Garbage Collection (GC)
The Garbage Collection (GC) mechanism is used to clean up invalid data in SSDs, freeing up space for new data writes. An excellent GC algorithm or mechanism can effectively enhance both the lifespan and steady-state performance of the SSD.
pSLC
pSLC technology is a technique that emulates MLC or multi-level cell flash memory as SLC (single-level cell). Through this technology, TLC/MLC flash memory can achieve a lifespan, reliability, and performance close to that of SLC flash memory.
TRIM
A function used to optimize the SSD garbage collection process by informing the SSD in advance which blocks are no longer needed, thereby speeding up space release, reducing WAF, and extending the SSD's lifespan.
pSLC Partition
Supports creating a logical partition for storing important data. Users can specify a special LBA range via protocol commands, and data subsequently written to this LBA range will always be stored in SLC mode, ensuring high reliability.
Product Specification
| PN | TMS88064GS325MW-00N0 | TMS88128GS325MW-00N0 |
| Module Name | TIMAR A88MH 64GB SSD | TIMAR A88MH 128GB SSD |
| Interface | SATA III 6.0 Gb/s | SATA III 6.0 Gb/s |
| Flash Type | MLC | MLC |
| Capacity | 64GB | 128GB |
| Operation Temperature | -40~85℃ | -40~85℃ |
| Sequential R/W(MB, max.) | 540/430 | 540/450 |
| Max. Power Consumption R/W(mW, max.) | 1100/1400 | 1100/1400 |
| Dimension (WxLxH/mm) | 69.85*100.45*7 | 69.85*100.45*7 |
| Max. Channels | 2 | 2 |
| ATA Security | YES | YES |
| H/S Write Protect | Customized Support | Customized Support |
| S.M.A.R.T. | YES | YES |
| Thermal Sensor | YES | YES |
| Vibration | 10~2,000Hz, 20G | 10~2,000Hz, 20G |
| Shock | 1,500G, duration 0.5ms, Half Sine Wave | 1,500G, duration 0.5ms, Half Sine Wave |
| MTBF(hours) | 3000000 | 3000000 |
| Storage Temperature | -55~95℃ | -55~95℃ |
Related Resources
Product Specification
TIMAR Industrial SATAIII 2.5 inch SSD 88 Series Datasheet
